What is ADS 800?

When it comes to parts cleaning, you need a parts cleaner that can be used across many applications and remove tough soils. ADS 800 cleans high volume, heavy and repetitive batches and is available for use in your industry.

ADS 800 is an automatic water based degreasing parts cleaner; simply load the part, close the lid and press start. Within minutes your part will be clean, ready for use; cutting downtime and increasing productivity.

FIND OUT MORE

Degrease parts and increase productivity

Watch how ADS 800 makes cleaning large, bulky and heavy parts simple.

Bulky parts are easily loaded into the large diameter basket and the basket inching facility enables you to quickly change parts and components; reducing downtime during service and repair.

GET IN TOUCH

Increase productivity with ADS 800

ADS 800 is the solution you need for cleaning large bulky parts. With a load and go operation, your parts are cleaned within minutes:

Large working area (600mm height/800mm basket)

Large working area (600mm height/800mm basket)

High payload capacity (250kgs)

High payload capacity (250kgs)

Basket inching facility (for ease of load / unload)

Basket inching facility (for ease of load / unload)

Key features of the ADS 800 parts cleaner

250kg payload, allows heavy and bulky parts to be cleaned

Top, bottom and side spray rails, cleans part from all angles

Safety cut out contact switch, improves user safety

Rotating basket, improves cleaning and coverage of the spray

Optional oil skimmer, extends fluid life and cleaning performance

Working height of 600mm, allows large parts to be cleaned

High volume pump, increases the flow of chemistry across the part to improve cleaning performance

Programmable pre-heat facility – allows cleaning to start immediately when the working shift starts

800mm diameter basket can load bulk parts or high volumes

Quick change components, reduces downtime during service and repair

Up to 140L sump capacity, increased fluid level extends fluid life and performance

Where does oil, grease, dirt and grime build-up in your operation?

Our ADS 800 parts cleaner removes carbon, oil, cutting fluids, grease, scale, glue and dirt and grime build-up across your applications and processes, including:

  • Engine & gearbox remanufacturing
  • Repairing cylinder heads, starter motors, alternators
  • Cleaning mold tools used in casting, injection and extrusion molding
  • Post production parts cleaning
DISCUSS YOUR NEEDS

What problems are you facing with parts cleaning?

Using a chemical that does not perform well or is unsuitable for the application and soil is a common problem. This risks damaging the part being cleaned and poses health and safety hazards for employees.

Reduced productivity is another common parts cleaning problem when the wrong parts cleaner is being used. This problem is often associated with cleaning heavy and bulky parts and where large volumes of parts are needed to be cleaned. Trying to clean heavy parts and large volumes with a lack of automation leads to expensive, time consuming labour.

The lack of a full service package from a provider is also a concern. With your parts cleaner, you don’t just expect the machine; you want regular service visits, customised solutions and expert advice – with NCH Parts Cleaning, you get a full service package.

How can ADS 800 overcome your parts cleaning problems?

Best in class chemistry

Specific chemistry targeted to meet your needs in a wide range of applications, created by our team of in-house chemists

Water based, surfactants and rust inhibitors included, long lasting performance, excellent surface cleaning

Choice of three chemistry solutions, depending on soil, substrate and cleaning requirement

Improve productivity

Programmable pre-heat facility – time saving

Easy to use – load and go, Automatic Degreasing Systems (ADS), clean parts in minutes

Large working area (600mm height/800mm basket) and high payload (250kgs)

Reduced downtime – quick component repair

Basket stepping feature – rotate basket at the press of a button to load and unload heavy parts

Industrial expertise and full service

Full service package for peace of mind

Regular service visits from dedicated service engineers

Designed and manufactured by NCH, coupled with our chemistry providing optimum degreasing

Expert advice on your parts cleaning needs

Integrated surface treatment, cleaning & degreasing services

Our team has more than 35 years of expertise in parts cleaning in Europe and worldwide. We have a full range of degreasing and surface treatment equipment and services available, including:

  • Degreasers
  • Automatic Units
  • Ultrasonic Units
  • Wet and Dry Blast units
CONTACT US

Your industry, our solution

At NCH Parts Cleaning, we supply parts cleaners to all types of industry and all business sizes.

Automotive

Automotive

  • Bearings
  • Engine parts & gearboxes
  • Starter motors
  • Alternators
CONTACT US
Manufacturing

Manufacturing

  • Tooling
  • Moulds
  • Equipment & plant repair
  • Clean after production
CONTACT US
Transport

Transport

  • Rail bogies
  • Engines
  • Brakes
CONTACT US
Refurbishment

Refurbishment

  • Gearboxes
  • Engine castings
  • Steering columns
  • Exhaust systems & brakes
CONTACT US
Aerospace

Aerospace

  • Engines & propeller engines
  • Landing gear & wheels
  • Actuators
  • Brakes
Parts Cleaning: ADS 800

We’ve got your parts cleaning needs covered

With NCH Parts Cleaning, you get the full service package. From set up of the machine to regular visits from our dedicated service team, we will take care of everything. Our full service package includes:

  • Fluid and chemistry replacement every 8 weeks
  • Full machine clean and inspection
  • Disposal of fluid waste at each service*

*subject to country

GET IN TOUCH

Fully installed and set up ready for use

Watch how the ADS 800 parts cleaner is easily installed and set up by our service team, from safety labels to wash cycle and temperature settings; everything is taken care of. Our parts cleaning service team will add the right chemistry for your needs and fully test and demonstrate to ensure full working order, ready for you to use.

GET IN TOUCH

Download our ADS 800 parts cleaner installation guide

How our parts cleaning experts install and set up your ADS 800 parts cleaning machine. Download the installation guides to see the process step by step. For further details, use the contact form on this page and one of our parts cleaning team will be in touch.

Pre-installation guide

Pre-installation guide

Download
Installation guide

Installation guide

Download

Chemistry solutions as easy as 1, 2, 3

ADS 800 not only provides a payload capacity of 250kgs and an 800mm basket diameter, enabling you to clean large parts quickly and easily, it also operates using one of three chemistry solutions. The solution you use depends on the substrate, contaminant and desired cleaning standard but all are water based, free from VOCs and contain corrosion inhibitors to protect your parts.

Storm 1
Soft/ white metals
Power Clean
General purpose
Super Bee™
Aviation chemistry
Contaminants Oil, grease, cutting fluid, dirt, carbon Scale, carbon, heavy duty soils Oil, grease, cutting fluid, carbon, scale
Substrate Aluminium, brass, copper,
stainless steel, plastics
Mild steel, cast iron All, particularly aluminium, copper, zinc
Industry types Medium to light applications Heavy duty Aviation approved
Advantages Excellent on white/soft metals. NSF approved Excellent on automotive gearboxes/engines Aviation approved, industry standard
Disadvantages Can foam up if not to temperature Can leave white residue on some applications Only use for Aviation
Volume per fill 4 litres 4kg tub 5 litres

ADS 800 and parts cleaning chemistry technical details

Download our technical data sheets for more information on our ADS 800 parts cleaner and the chemistry available for use in it. For further details, use the contact form on this page and one of our parts cleaning team will be in touch.

ADS 800

ADS 800

DOWNLOAD
Storm 1

Storm 1

DOWNLOAD
ADS Power Clean

ADS Power Clean

DOWNLOAD
Super Bee 300 LFG

Super Bee 300 LFG

DOWNLOAD

What’s included in and ADS 800 parts cleaner service?

ADS 800 is fully serviced by our parts cleaning experts. Your ADS 800 machine will be fully cleaned and inspected every 8 weeks, which includes the machine being drained, refilled and chemistry replaced.

GET IN TOUCH

ADS 800 service guide and spare parts catalogue

Want to know more about what’s involved in an ADS 800 parts cleaner service? Or what spare parts are available? Download our service guide and spare parts catalogue. For further details, use the contact form on this page and one of our parts cleaning team will be in touch.

Service guide

Service guide

Download
Spare parts catalogue

Spare parts catalogue

Download

FAQ

Let us answer your ADS 800 parts cleaner questions. If you can’t find the answer you are looking for, get in touch and we’ll answer all your queries.

What electricity supply is required to run the ADS 800?

3 phase electricity supply – 415V, 32A, 5 pin neutral & earth.

What are the benefits of ADS 800?

Automation

250kg Payload

800mm Basket diameter

600mm Working height

Pre-heat facility

CE approved equipment

Multiple substrates can be cleaned

Multiple NCH Chemistries suited to different substrates

What is the sump capacity of the ADS 800?

140 litres maximum fill level.

What is the operating pressure and volume output of the pump on the ADS 800?

3.6 to 5.5 Bar and 150 litres per minute.

What substrates can I clean in the ADS 800?

Many substrates can be cleaned; all metals, plastics, ceramics.

How often do I need to change the fluid in the ADS 800?

This depends on the amount of use, but typically we recommend a full service and fluid change every 8 weeks.

At what temperature should the machine operate at?

We recommend and pre-set the machine to operate at 60°C.

How long is the wash cycle?

Machine can wash for cycles of between 1 and 60 minutes.

What chemistry is recommended to be used in the ADS 800?

Three options:

Our patented chemistry Storm1 at 4 litres per fill

ADS Power Clean at 4kg Tub per fill

Aviation approved Super Bee at 5 litres per fill

What is the start-up procedure for the ADS 800?

  1. Ensure the machine and chemistry is up to operating temperature
  2. Load the parts into the machine, spread them evenly around the basket to spread the weight distribution
  3. Close the lid
  4. Press the start button
  5. Machine will automatically stop at the end of the wash cycle or when you hit the stop button

How often should I have my ADS 800 serviced?

We recommend an 8 week service cycle to maintain the optimum chemistry and machine performance.

What can I do if my machine chemistry foams a little?

A little foaming is perfectly normal, but some contaminants can cause excess foaming. To prevent this, add 25ml of NCH FC 101 (if silicone is a problem, then add Cease Foam NS), available from your local NCH team, contact us for more information.

Can I program the machine to pre-heat the chemistry?

The machine has the facility to be pre-programmed, to allow the chemistry to pre-heat up to temperature before a working shift pattern starts. For example if parts cleaning starts at 8am, the machine can be pre-programmed to switch on and begin to heat up at 7am, etc.

What do I do if my machine does not start?

Ensure you have power to the machine (is there a display on the digital control panel screen) and that the machine is up to temperature (the ‘Ready to Start’ button is illuminated).

Is there sufficient liquid in the sump, minimum fill level to operate is 90 litres (if the low level light is illuminated then add more liquid to the sump to reach at least the minimum level).

Refer to the user manual to troubleshoot the machine. If machine still does not start please contact NCH.

ADS 800 documents downloads

For technical details on our ADS 800 parts cleaner, please download our user manual. For all available spare parts, please download our spare parts list. For further details, use the contact form on this page and one of our team will be in touch.

Our ADS 800 parts cleaner is free of VOCs and is CE compliant. It features a safety cut out contact switch, improving user safety.

User manual

User manual

DOWNLOAD
Spare parts catalogue

Spare parts catalogue

Installation guide

Installation guide

DOWNLOAD
Service guide

Service guide

DOWNLOAD
Chemistry guide

Chemistry guide

DOWNLOAD

Speak to the parts cleaning experts

Get in touch to find out more about our professional grade, environmentally friendly solutions for your parts cleaning needs. Our parts cleaning experts will discuss your needs with you to find the right solution for your facility.

+46 (0) 8 613 71 90

  • Clean parts
  • Reduce expenses
  • Eco-friendly solutions